Outdated References 94: Infested

It's a weird week for us because we only have one show to talk about and it's The Bad Batch: Infested. I could ramble on and on but this week's episode is on the short side so how about giving us a listen? 

--Nathan 

It's a weird week for us because we only have one show to talk about and it's The Bad Batch: Infested. I could ramble on and on but this week's episode is on the short side so how about giving us a listen? 

--Nathan 


Comments

Post a Comment

Popular posts from this blog

How to Mod the Hori Fighting Stick EX2 with Authentic Arcade Parts (Xbox 360 Version)

Image
Here's one of my walk-through articles on how to modify your Hori Fighting Stick EX2 that I originally wrote for Pineconeattack back on 12.07.2008. I hope this article will still be useful to those still modify and upgrading your fightsticks. I will keep it up here for archival purpose.  --Nathan The Hori Fighting Stick EX2 is a good stick that I got pretty cheap, but like all stock joysticks, there are plenty of room for improvements. In my review of this stick, I brought up two minor complaints with this stick: mushy buttons and the square restrictor plate. Well, here’s the walk-through on how to fix these issues.  With a little soldering skill and plenty of patience, you can make this good stick into an incredible one and it’s not as hard as you might think. (UPDATE: If you are looking for more joystick projects then head over here to add an actual Sanwa Stick inside your Hori EX2 or here to mod the MadCatz Fight stick.) WARNING: This is a simple project
Read more

How To Mod The Madcatz Fight Stick with Seimitsu Parts.

Image
This is probably my most requested walk-through articles on how to upgrade a Madcatz Standard Fight Stick that I originally wrote for Pineconeattack back on 08.06.2009. I hope this article will still be useful to those still modify and upgrading your fightsticks. I will keep it up here for archival purpose.  --Nathan The fighting craze is back in an upturn for the mainstream but you can take advantage of this trend by picking up some of the best joysticks out for the North American market which is the Madcatz Tournament Edition fight joystick with 100% Sanwa arcade joystick and buttons. Of course such awesomeness does come at a hefty price tag of $150. The problem is that not everyone can justify the hefty high price tag for an expensive joystick to play Street Fighter IV, Blazblue or King of Fighter XII so many have opted to pick up the cheaper Madcatz Standard Fight Stick. Good news! This guide will show you how to get your cheaper standard fight stick up to arcade s
Read more

How to Mod the Hori EX2/Hori Wii Fighting Stick with Actual Sanwa Joystick and Buttons

Image
Here's one of my walk-through articles on how to modify your Hori Wii Fighting Stick/EX2 that I originally wrote for Pineconeattack back on 03.07.2009. I hope this article will still be useful to those still modify and upgrading your fightsticks. I will keep it up here for archival purpose.  --Nathan The Hori EX2 walk-through seems to be a huge success with the community but I’ve been getting a lot of e-mails on people wanting a walkthrough on two topics: How to add a Sanwa joystick in your Hori EX2 & how to mod the Hori Wii Fighting Stick. Well since I was in the need for a good joystick for Tatsunoko vs. Capcom and I wanted a joystick that played better than the stock stick, well good news, I finally finished modding my Wii Fighting stick with Sanwa push buttons & an authentic Sanwa joystick. It wasn’t as difficult as I expected but it defiantly was time consuming to figure out what needed to be trimmed, but more on that later. The Wii Fighting Stick and the
Read more